NTE572 Silicon Rectifier General Purpose, Fast Recovery
Features: D Fast Switching D Low Leakage D Low Forward Voltage Drop D High Current Capability D High Current Surge D High Reliability Maximum Ratings and Electrical Characteristics: (TA = +25C unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.) Maximum Recurrent Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V Maximum RMS Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700V Maximum DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V Maximum Average Forward Rectified Current (.375" (9.5mm) lead length, TA = +55C) . . . . . . . 6A Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) . . . 300A Maximum Instantaneous Forward Voltage (IF = 6A DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3V Maximum DC Reverse Current (At Rated DC Blocking Voltage, TA = +25C) . . . . . . . . . . . . . . 10A Maximum Full Load Reverse Current (Full Cycle Average .375" (9.5mm) lead length, TL = +55C) . . . . . . . . . . . . . . . . . . . . . 150A Maximum Reverse Recovery Time (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns Typical Junction Capacitance (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100pF Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +175C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +175C Note 1. Reverse Recovery Test Conditions: IF = 500mA, IR = 1A, IRR = 250mA. Note 2. Measured at 1MHz and applied reverse voltage of 4.0 volts.
1.000 (25.4) Min
.360 (9.1) Max
.052 (1.3) Dia Max Color Band Denotes Cathode
.360 (9.1) Dia Max
|
